WTS Midwest Industries T Series 12" Larue Troy Magpul
Posted: Fri Apr 05, 2013 11:43 am
Wanting to sell my 12" free float quad rail $130 shipped
Pic on my rifle now
Pic on my rifle now
TexasCHLforum.com
The focal point for Texas firearms information and discussions
http://mail.texaschlforum.com/
WTS Midwest Industries T Series 12" Larue Troy Magpul
Page 1 of 1
Re: WTS Midwest Industries T Series 12" Larue Troy Magpul
Posted: Fri Apr 05, 2013 2:02 pm
Sorry, not interested, but that is cool looking.
Re: WTS Midwest Industries T Series 12" Larue Troy Magpul
Posted: Fri Apr 05, 2013 2:32 pm
Thank you sir, only reason I'm selling rail and Aimpoint setup is because I'm SBR'ing this rifle down to 10.5 inches and suppressing it. So I need a 10" rail system and I'll only be taking shots at about 100-150 yards I wanted a small little red dot like the T1 or EXPS2/3
Re: WTS Midwest Industries T Series 12" Larue Troy Magpul
Posted: Tue Apr 09, 2013 8:32 pm
Will the rail clear a standard gas block? Would love to replace the standard hand guard on my Bushmaster ORC but don't want to have to deal with installing a low-profile gas block...
Re: WTS Midwest Industries T Series 12" Larue Troy Magpul
Posted: Thu Apr 11, 2013 1:22 pm
I apologize for the late reply.
If you are talking about a standard front sight that has been cut down then yes it will fit over it. If you are talking about a gas block that has the rail on top then no. It has to have a low profile gas block installed. This isn't a 2 piece drop in rail, you would have to remove the gas block to install this anyway. If you are already removing it might as well replace it with a low profile.
If your gas block looks like the one below then yes it will fit over it. You might have to take a hacksaw to the boyo lug and sling loop, but again you will have to remove it to get the barrel nut over the barrel.
If you are talking about a standard front sight that has been cut down then yes it will fit over it. If you are talking about a gas block that has the rail on top then no. It has to have a low profile gas block installed. This isn't a 2 piece drop in rail, you would have to remove the gas block to install this anyway. If you are already removing it might as well replace it with a low profile.
If your gas block looks like the one below then yes it will fit over it. You might have to take a hacksaw to the boyo lug and sling loop, but again you will have to remove it to get the barrel nut over the barrel.
Re: WTS Midwest Industries T Series 12" Larue Troy Magpul
Posted: Thu Apr 11, 2013 1:23 pm
The index clips and Troy QD sold separately.
Thought this was sold also, but haven't heard from buyer.
New pics of the rail off the gun. New price is $130 shipped
Thought this was sold also, but haven't heard from buyer.
New pics of the rail off the gun. New price is $130 shipped