Ruined an IWB holster today.

Gun, shooting and equipment discussions unrelated to CHL issues

Moderator: carlson1


Topic author
john L
Junior Member
Posts in topic: 4
Posts: 43
Joined: Thu May 28, 2009 4:25 pm

Ruined an IWB holster today.

#1

Post by john L »

I was off today and the weather was nice, so I decided to do my monthly Range time out back on the property. I carry a PT840 for EDC and brought one of my cheap Uncle Mikes IWB holster out for the plinking fun.

All was going well and I was having a good time, when I decided to work on my point shooting skills. I learned how to point shoot while in the military and still practice it quite a bit just in case i ever find myself in a tight spot where time is life. I had two targets set up at 20 paces and was facing away from the targets and drawing as I turned in on them.

I was on my forth quick draw of tapping two into each target, when I drew and fired, but noticed that something black had flown through the air and fell about 15 paces in front of me. I looked down to realize that my IWB holster had come unclipped from my belt and been drawn with my weapon; the fact I was point shooting and not using the sights, I didn't notice the gun still holstered and fired off two rounds.

The rounds blew out the bottom of the holster and continued on to the target. I couldn't believe what I had just done and thinking about it, I believe it's time to look for a better IWB holster. I have a Black Hawk Tactical Holster that is OWB and works well for winter time carry, but isn't great for hiding a PT840 in the summer time.

You guys have any suggestions for a good IWB holster for the PT840?
User avatar

USA1
Senior Member
Posts in topic: 1
Posts: 7412
Joined: Wed Apr 08, 2009 5:37 pm
Location: Tomball ,Texas
Contact:

Re: Ruined an IWB holster today.

#2

Post by USA1 »

its OK ,that would be considered a "justifiable shooting" :cool:
Glock Armorer - S&W M&P Armorer

webb3201
Member
Posts in topic: 1
Posts: 190
Joined: Wed Aug 19, 2009 9:34 pm

Re: Ruined an IWB holster today.

#3

Post by webb3201 »

Cross Breed Supertuck!
07/25/2009 - Online application complete
08/16/2009 - CHL Class
08/19/2009 - CHL Application Mailed
08/24/2009 - Application Received
09/21/2009 - CHL application processing
11/04/2009 - Application Approved
11/06/2009 - Plastic in hand
User avatar

C-dub
Senior Member
Posts in topic: 2
Posts: 13563
Joined: Sat May 16, 2009 7:18 pm
Location: DFW

Re: Ruined an IWB holster today.

#4

Post by C-dub »

Very interesting and, yeah, a little funny. However, I'm also wondering about the safety of a holster that will allow the gun to be fired while holstered. None of my holsters will allow this.
I am not and have never been a LEO. My avatar is in honor of my friend, Dallas Police Sargent Michael Smith, who was murdered along with four other officers in Dallas on 7.7.2016.
NRA Patriot-Endowment Lifetime Member---------------------------------------------Si vis pacem, para bellum.................................................Patriot Guard Rider

Topic author
john L
Junior Member
Posts in topic: 4
Posts: 43
Joined: Thu May 28, 2009 4:25 pm

Re: Ruined an IWB holster today.

#5

Post by john L »

C-dub, the holster does cover the trigger and safety when the weapon is holstered; the only thing I can figure is the weapon caught on the inside material as I drew, though it's clear the weapon came out far enough for me to swipe the safety off and get on the trigger as I drew. Like I said, time for an IWB upgrade.

Derekhie
Member
Posts in topic: 1
Posts: 160
Joined: Sun Dec 28, 2008 5:50 pm
Location: San Antonio, Texas

Re: Ruined an IWB holster today.

#6

Post by Derekhie »

webb3201 wrote:Cross Breed Supertuck!
+1 on the Supertuck. I even shoot single stack with it.
User avatar

MoJo
Senior Member
Posts in topic: 1
Posts: 4899
Joined: Thu Dec 23, 2004 6:10 pm
Location: Vidor, Tx
Contact:

Re: Ruined an IWB holster today.

#7

Post by MoJo »

That is the main reason I don't like IWB's with clips, pulling the holster with the gun. Some paddle style holsters will do the same thing - - - check your gear.
"To disarm the people is the best and most effectual way to enslave them."
George Mason
Texas and Louisiana CHL Instructor, NRA Pistol, Rifle, Shotgun, Personal Protection and Refuse To Be A Victim Instructor

BrianSW99
Senior Member
Posts in topic: 1
Posts: 659
Joined: Wed Apr 01, 2009 9:51 am

Re: Ruined an IWB holster today.

#8

Post by BrianSW99 »

Another recommendation for the Crossbreed SuperTuck. You won't have any problem with it coming out with the gun while drawing. Their belts are nice too if you need a good gunbelt. I got the velcro clip option to go with the holster and am very pleased with it.

Brian
NRA & TSRA Member
CHL Instructor
User avatar

TexasComputerDude
Senior Member
Posts in topic: 1
Posts: 964
Joined: Thu May 01, 2008 4:47 pm
Location: Lufkin, TX
Contact:

Re: Ruined an IWB holster today.

#9

Post by TexasComputerDude »

MoJo wrote:That is the main reason I don't like IWB's with clips, pulling the holster with the gun. Some paddle style holsters will do the same thing - - - check your gear.

one of the reasons I like my infidel holster is that when drawing I can apply pressure to the top of the holster and pop my gun out.

I carry my gun holstered 100% of the time and while its outside of my pants with just a push of my thumb the holster flies away. idk if its the correct way to do things but it works quickly and safely for me.
Glock 30 - main ccw
User avatar

C-dub
Senior Member
Posts in topic: 2
Posts: 13563
Joined: Sat May 16, 2009 7:18 pm
Location: DFW

Re: Ruined an IWB holster today.

#10

Post by C-dub »

john L wrote:C-dub, the holster does cover the trigger and safety when the weapon is holstered; the only thing I can figure is the weapon caught on the inside material as I drew, though it's clear the weapon came out far enough for me to swipe the safety off and get on the trigger as I drew. Like I said, time for an IWB upgrade.
Thanks for clearing that up. I was in a rush this morning and didn't take the time to check it out for myself. Sorry. :oops:
I am not and have never been a LEO. My avatar is in honor of my friend, Dallas Police Sargent Michael Smith, who was murdered along with four other officers in Dallas on 7.7.2016.
NRA Patriot-Endowment Lifetime Member---------------------------------------------Si vis pacem, para bellum.................................................Patriot Guard Rider
User avatar

Excaliber
Moderator
Posts in topic: 1
Posts: 6198
Joined: Tue May 27, 2008 9:59 pm
Location: DFW Metro

Re: Ruined an IWB holster today.

#11

Post by Excaliber »

MoJo wrote:That is the main reason I don't like IWB's with clips, pulling the holster with the gun. Some paddle style holsters will do the same thing - - - check your gear.
I had an experience very similar to John L's a number of years ago on a bank robbery call. (I think the holster was an Uncle Mike's as well.) Fortunately the situation didn't call for discharging the weapon, but seeing it come out with the gun was a sobering experience. It didn't take a lot of imagination to realize that this could be the start of a really bad day.

Since that incident I've never carried a holster with a device that doesn't positively fasten the holster to the belt in a way that makes sure it can't come out on the draw. I favor full belt loops for that reason, but the type of clip used on the Comp-Tac Infidel and some types of J clips have also proven themselves worthy over time.
Excaliber

"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." - Jeff Cooper
I am not a lawyer. Nothing in any of my posts should be construed as legal or professional advice.

Reloader
Senior Member
Posts in topic: 1
Posts: 354
Joined: Thu Dec 28, 2006 2:16 pm
Location: East Texas

Re: Ruined an IWB holster today.

#12

Post by Reloader »

I prefer the holsters by Greg Kramer..www.kramegunleather.com. Most are over 10 years old and look brand new.
NRA Life Member
NRA Instructor
Amateur radio Instructor, VE KE5LDO
Tarleton State University '74

Topic author
john L
Junior Member
Posts in topic: 4
Posts: 43
Joined: Thu May 28, 2009 4:25 pm

Re: Ruined an IWB holster today.

#13

Post by john L »

Placed my order this morning for a crossbreed supertuck deluxe with the combat cut. Hopefully I have killed my last paper target while shooting through a holster.

HankB
Senior Member
Posts in topic: 1
Posts: 1394
Joined: Mon Aug 08, 2005 2:03 pm
Location: Central TX, just west of Austin

Re: Ruined an IWB holster today.

#14

Post by HankB »

Good for you! :clapping:

Seriously, I mean it - the time to find out about an equipment deficiency is on the range, as you did . . . NOT when defending yourself against one or more bad guys.

Can't recommend something for the PT840 specifically, but my 1911 & BHP ride in a Milt Sparks Versa-Max II when I carry them, and for my Glock I use a Comp Tac CTAC.
Original CHL: 2000: 56 day turnaround
1st renewal, 2004: 34 days
2nd renewal, 2008: 81 days
3rd renewal, 2013: 12 days
Post Reply

Return to “General Gun, Shooting & Equipment Discussion”