Page 1 of 1
Dillon XL650 spilling powder
Posted: Thu Nov 14, 2013 1:51 pm
by thatguy
My 650 will spill powder (titegroup) from a case (9mm) at random (every 20th case). I changed the detent spring back to the old spring so there is not as much tension (Iv'e seen where some cut the spring down...). Could it be a worn shell plate or maybe the retaining pins?
Re: Dillon XL650 spilling powder
Posted: Fri Nov 15, 2013 7:44 am
by natgas
I've cut a couple coils off the spring--it helped; then added the bearing and washers and now it's smooth. Might try it
Re: Dillon XL650 spilling powder
Posted: Fri Nov 15, 2013 8:37 am
by thatguy
bearings and washer?
Re: Dillon XL650 spilling powder
Posted: Sat Nov 16, 2013 11:37 pm
by natgas
Do a search for Dillon 650 shellplate jump and you'll find the bearing and washers.
Re: Dillon XL650 spilling powder
Posted: Tue Dec 03, 2013 12:14 pm
by thatguy
Cut the spring, 80% improved.
