Questions about Printing...

The "What Works, What Doesn't," "Recommendations & Experiences"

Moderators: carlson1, Crossfire


DONT TREAD ON ME

Re: Questions about Printing...

#31

Post by DONT TREAD ON ME »

jeremya wrote:Thanks guys! I have carried several times with my OWB holster and in a few days (Christmas) I will have my IWB holster. I can't wait to try out the IWB (M-TAC) the OWB holster I have from Comp-Tac rides a bit too high to be comfortable.

So far every time I have carried I felt like there was a spotlight on me. I guess it's just going to take a little time... I think the new holster will help as well.

Another quick question... do most people carry a spare mag in a mag holster or no?

thanks,

Jeremy
Gotta ask how do you like your holster? I have the same one and carry my XD.45 Service model in it with no problem and just love the holster. I dont wear baggy clothes either. Wrangler type jeans, Durango boots and a t-shirt or flannel and I dont print.

bubba1876
Member
Posts in topic: 2
Posts: 69
Joined: Sat Jan 03, 2009 2:44 am
Location: North Texas

Re: Questions about Printing...

#32

Post by bubba1876 »

For those of you who aren't prone to wearing a Hawaiian shirt, try camo shirts. They hide any bends in the material just fine. I wear lot's of black t-shirts, and that helps with shadows.

This summer I'm going to try an under armor sleeveless shirt with a t-shirt over it. Just gonna pull the under armor over the pistol, so the t-shirt will just slide along the under armor shirt with no snagging on the pistol. This is pretty much my 'look' too. T-shirts and jeans kinda guy. :coolgleamA:
Glock 19
User avatar

DoubleJ
Senior Member
Posts in topic: 2
Posts: 2367
Joined: Fri Jul 13, 2007 9:29 am
Location: Seattle, Washington

Re: Questions about Printing...

#33

Post by DoubleJ »

you might be better off with the UnderArmor shirt under the pistol
wear the outer shirt as a cover garment. It'll make for a quicker draw, if you need to.

just watch the wind.
FWIW, IIRC, AFAIK, FTMP, IANAL. YMMV.
User avatar

Purplehood
Senior Member
Posts in topic: 3
Posts: 4638
Joined: Thu May 29, 2008 3:35 pm
Location: Houston, TX

Re: Questions about Printing...

#34

Post by Purplehood »

I can't find any specific mention of it by others on this forum (maybe I spelled it wrong), but I sometimes wear my 5.11 t-shirt under any type of dress-shirt that you would normally tuck in.
You can have a weapon in both pockets (under your arms if not familiar with 5.11 t-shirt), and it feels like under-armor. With your shirt tucked-in and flared out on both sides, it is difficult to be made.
Life NRA
USMC 76-93
USAR 99-07 (Retired)
OEF 06-07
User avatar

DoubleJ
Senior Member
Posts in topic: 2
Posts: 2367
Joined: Fri Jul 13, 2007 9:29 am
Location: Seattle, Washington

Re: Questions about Printing...

#35

Post by DoubleJ »

nice. :thumbs2:
FWIW, IIRC, AFAIK, FTMP, IANAL. YMMV.

NcongruNt
Senior Member
Posts in topic: 2
Posts: 2416
Joined: Sun Feb 25, 2007 12:44 am
Location: Austin, Texas

Re: Questions about Printing...

#36

Post by NcongruNt »

Purplehood wrote:I can't find any specific mention of it by others on this forum (maybe I spelled it wrong), but I sometimes wear my 5.11 t-shirt under any type of dress-shirt that you would normally tuck in.
You can have a weapon in both pockets (under your arms if not familiar with 5.11 t-shirt), and it feels like under-armor. With your shirt tucked-in and flared out on both sides, it is difficult to be made.
I carry my BUG like this probably half the time I carry, though it's usually with a work shirt.

I've done the 2-weapon solution on a couple of occasions, and had no problem - though I prefer to have the BUG pocket-carried with the main carry in the shirt, to allow an alternative draw were the need to arise and draw from the holster shirt not feasible. That's how I do it on "dress up" occasions where I can't use an un-tucked cover shirt with a belt holster.

Here's an illustrated example:

http://www.texasshooting.com/TexasCHL_F ... 13&t=15033" onclick="window.open(this.href);return false;
Image
NRA Member
TSRA Member
My Blog: All You Really Need
User avatar

PUCKER
Senior Member
Posts in topic: 1
Posts: 1564
Joined: Wed Jan 30, 2008 4:05 pm
Location: Grapevine, TX

Re: Questions about Printing...

#37

Post by PUCKER »

+1 for me on the Hawaiian shirts!! I've been wearing them for years. And Keith B (from another post on this thread) - my wife picks MANY of them out! Crazy, eh? I look at it this way - it's not too often that you see a guy in a Hawaiian shirt having a bad day - usually it's a good time! That's my philosophy anway! And yes, they work pretty good for CCW too.
Liberty wrote:
scootergeek wrote:To me the whole Haiwan shirt just screams I got a gun. Good luck with what you decide on. Welcome to the life of a CHL'er.
I always thought jackets screams "I got a gun."
I guess it depends on where you live and ones lifestyle. I've been wearing Hawaiian shirts long before I ever started packing. Hawaiian's and Galvestonians must be the most armed men on earth.

fredtubbs
Member
Posts in topic: 1
Posts: 66
Joined: Sat Jul 26, 2008 6:31 am

Re: Questions about Printing...

#38

Post by fredtubbs »

scootergeek wrote:To me the whole Haiwan shirt just screams I got a gun. Good luck with what you decide on. Welcome to the life of a CHL'er.
I think Hawaiian shirts scream 'I love Magnum PI'. I have no problem with that.
Some call me Fred, some don't.

NRA Member
CHL
Bitter clinger

FTBL
Junior Member
Posts in topic: 1
Posts: 9
Joined: Tue Jan 27, 2009 11:16 am

Re: Questions about Printing...

#39

Post by FTBL »

As far as i know there is no printing law!As far as accidental showings in public no harm unless you cause an uproar and stampede out the door causing injuries!
User avatar

that1otherdude
Member
Posts in topic: 2
Posts: 121
Joined: Sat Oct 18, 2008 9:01 am
Location: League City,TX

Re: Questions about Printing...

#40

Post by that1otherdude »

scootergeek wrote:To me the whole Haiwan shirt just screams I got a gun. Good luck with what you decide on. Welcome to the life of a CHL'er.
I think Photographer's Vests scream "I've got a gun and refuse to consider IWB...."
"Anyone who thinks that a gun has a personality that makes it apt for evil should admit the fact that he is not making sense, and therefore should stay out of adult discussions."
-Col. Jeff Cooper

:txflag:

Morgan
Senior Member
Posts in topic: 2
Posts: 581
Joined: Fri Oct 31, 2008 7:55 am
Location: DFW

Re: Questions about Printing...

#41

Post by Morgan »

Those of us "in the know" know what constitutes a likely concealed gun. We've seen the products advertised. We've discussed them. We've talked options. We've tried stuff out.

Joe on the Street doesn't see any of these things. He doesn't see the over-sided flat fanny pack as a gun holster. He doesn't see the un-tucked shirt as a cover garment. He doesn't see the lump under the vest. I bought a couple very light HI shirts to try out at work, and people commented on the shirts... I feel they print a little more than the things I was wearing before, but hey, nobody else noticed...not even the other CHL people in my area.

bubba1876
Member
Posts in topic: 2
Posts: 69
Joined: Sat Jan 03, 2009 2:44 am
Location: North Texas

Re: Questions about Printing...

#42

Post by bubba1876 »

What's wrong with just going shirtless with a pistol in a OWB holster with a plastic bag over it !!! :lol:

Actually just found a perfect shirt for me. I've had a problem with "Dickies" style shirts (tooooo long). I wear 3x shirts because I have wide shoulders and back, but these shirts are always too long.

However, Academy has a 'Magellan" collared khaki style shirt with velcro/button pockets that are 3x width, but are 2x length........... perfect!!! :clapping:
Glock 19

Roostor
Junior Member
Posts in topic: 1
Posts: 4
Joined: Wed Feb 11, 2009 3:51 am
Location: Galveston County

Re: Questions about Printing...

#43

Post by Roostor »

I worried about "printing" too, but I checked into the "SmartCarry" holster which is really a pouch type, that is positioned inside waistband but in front in the genitalia area. I can carry it while wearing shorts and t-shirt and not be "made".

ErnieP
Member
Posts in topic: 1
Posts: 113
Joined: Sun Jul 27, 2008 8:35 pm
Location: Bastrop County, TX

Re: Questions about Printing...

#44

Post by ErnieP »

The Annoyed Man wrote:Last night, one of my friends from church and I were leaving a Bible study we had been to together, and we started talking about rifles. After a few minutes, he straight up asked me, "do you ever pack heat, or do you have a CHL?" Well, he's a pretty good friend, and he is gun friendly, so I confessed that yes, I carry and have a CHL. He said "me too," and showed me his Glock 17 which was hidden under his sweater. He then asked to see what I carry - a Kimber Ultra Carry II - so I showed him. We talked for a few minutes more, and then each went on our way.

Now, the point of all this is that he is right handed, I'm left handed, and we have been sitting in the same spots on the same couch for the past 6 weeks on Thursday nights - with him on the left end of the couch, and me on the right end. Thus, my gun side was facing toward him, and his was toward me, and neither one of us ever realized that the other had been carrying all this time until last night when it came up in conversation.

The odds are practically nil that an uninitiated person is going to realize that you've got a pistol concealed about yourself.
If I read your post correctly, your guns were "facing" each other. If that is true, as a general "suggestion", I would suggest you switch ends on the couch. It is always a good practice to "control" your gun by minimizing the opportunity for it to come into contact with others in general, and BGs in particular. If you switch ends, the ends of the couch should better protect your gun and minimize the risk of someone sitting down beside you, brushing up against some hard metal object, and thus inviting unnecessary questions. JMHO

quoheleth
Member
Posts in topic: 1
Posts: 168
Joined: Mon Aug 25, 2008 8:51 am

Re: Questions about Printing...

#45

Post by quoheleth »

As far as i know there is no printing law!As far as accidental showings in public no harm unless you cause an uproar and stampede out the door causing injuries!
This is what I understood from my CHL instructor. If you accidentally flash - he used the example of the wind flipping up the tail of his shirt while he was outside with a group on the firing line - it's just that: an accident. YOu have made an honest attempt to cover & conceal, and something beyond your control exposed his weapon which he immediately rectified.

At a LGS, one of the sales clerks walks around with his 1911 commander tucked in an underarm shoulder rig which he wears under a vest. While it is covered by the vest, if he moves that arm even a fraction, the Commander sees daylight. It sees a lot of daylight, too, in the course of a day.

If my understanding is incorrect, if there is a printing law, I need to be corrected - please. But no rush...I'm Week One into what will likely be a 3-5 month wait. :cryin

Q
Texas CHL received 07/24/09 and being used daily.
Post Reply

Return to “New to CHL?”