.300 BLK pistol

[Bitter Clinger]

Duuuuuude....

I don't like having to disassemble to fit in my backpack

Have you chrono’ed any loads through that stubby barrel? Just curious.

(BTW, don’t tell anyone, but that’s not a pistol anymore. )

Not yet. According to all the things I've read, I should be getting a hair over 1700fps with Barnes 110gr VOR-TX, which should give me an effective range of about 150-200yds, which is exactly what I built the gun for. I want to give some Lehigh Defense loads a try as well.

As for being a pistol... what did I miss? Brace, no VFG...

TAM, sure looks like a pistol to me as well. What are you seeing that leads you to that conclusion? I have virtually the identical set up on more than one firearm. Thanks!

THIS has a rifle stock, therefore it is no longer a pistol:


That is what I was referring to. My son has the nearly identical setup, with the same stock. He had to register the lower for an SBR and get the stamp. BTW, he worked for a NFA dealer for a while and knows what he’s talking about. Only difference is, his is chambered in 5.56, with a 7” barrel.

Sorry brother, will have to disagree. That is a pistol brace. Pretty certain its the Maxim Defense Industries CQB Pistol PDW Brace (https://www.maximdefense.com/product/ma ... -for-ar15/). It does look quite a bit like the rifle stock, but its clearly the pistol brace.

[jb2012]

Duuuuuude....

I don't like having to disassemble to fit in my backpack

Have you chrono’ed any loads through that stubby barrel? Just curious.

(BTW, don’t tell anyone, but that’s not a pistol anymore. )

Not yet. According to all the things I've read, I should be getting a hair over 1700fps with Barnes 110gr VOR-TX, which should give me an effective range of about 150-200yds, which is exactly what I built the gun for. I want to give some Lehigh Defense loads a try as well.

As for being a pistol... what did I miss? Brace, no VFG...

TAM, sure looks like a pistol to me as well. What are you seeing that leads you to that conclusion? I have virtually the identical set up on more than one firearm. Thanks!

THIS has a rifle stock, therefore it is no longer a pistol:


That is what I was referring to. My son has the nearly identical setup, with the same stock. He had to register the lower for an SBR and get the stamp. BTW, he worked for a NFA dealer for a while and knows what he’s talking about. Only difference is, his is chambered in 5.56, with a 7” barrel.

I think this is the brace that he is using
https://www.sb-tactical.com/product/sbpdw/

[The Annoyed Man]

I have started another thread specifically on the subject of when a pistol becomes an SBR HERE.

[The Annoyed Man]

I think this is the brace that he is using
https://www.sb-tactical.com/product/sbpdw/

If so, then I stand corrected. It looked to my admittedly decrepit eyes like a full on PDW shoulder stock.

[BBYC]

How is the pistol working out for you? With the setup I have on mine it is all I need for a truck gun at this time. Shot a big pig at 245 yds last week and coyote at 225 yds today. My first mark under crosshair is on at 225 yds and this is what I used for both shots. Distance was confirmed with range finder after shot on both animals. Push your pistol out on distance and I think you will be very surprised.

What scope are you using? I'm thinking of getting the Primary Arms 3x ACSS for 300 BLK. I have the 2.5x 5.56 version on a rifle and like it.

[Sidro]

A cheap UTG 3x9x32 bugbuster.

[The Annoyed Man]

I think this is the brace that he is using
https://www.sb-tactical.com/product/sbpdw/

If so, then I stand corrected. It looked to my admittedly decrepit eyes like a full on PDW shoulder stock.

For the sake of clarification, this is what I thought I was looking at above, and I apologize for having thrown a little confusion into the thread:


That’s my son’s SBR, and I was confusing the PDW brace above with his PDW stock.

[MadMonkey]

I think this is the brace that he is using
https://www.sb-tactical.com/product/sbpdw/

If so, then I stand corrected. It looked to my admittedly decrepit eyes like a full on PDW shoulder stock.

For the sake of clarification, this is what I thought I was looking at above, and I apologize for having thrown a little confusion into the thread:


That’s my son’s SBR, and I was confusing the PDW brace above with his PDW stock.

No worries, it's easy to mix them up. The Maxim brace (correctly guessed above) is fairly new and looks a lot like a stock. The strap is what will give it away

Perfect example of how unconstitutional regulations just make it confusing for everybody though

What scope are you using? I'm thinking of getting the Primary Arms 3x ACSS for 300 BLK. I have the 2.5x 5.56 version on a rifle and like it.

I have a 2.5x as well and I like the ACSS reticle so much I'm switching to it for all of my magnified optics.

[LAYGO]

I think this is the brace that he is using
https://www.sb-tactical.com/product/sbpdw/

If so, then I stand corrected. It looked to my admittedly decrepit eyes like a full on PDW shoulder stock.

My SBPDW does NOT have the QDs on the frame like that. It's on the bottom center similar to a back plate with QD.