Marlin 336

[1s1k52]

Thanks man for all the information. Anyone got any recommendations to where to look other than local? I usually look at dallasguns.com or texasguntrader. I look on here and the marlin forum.

Some examples of real marlins with a crossbolt safety is what I am after. So I know.

[mr surveyor]

I haven't spent near as much time perusing the shops since the obomination set in, but as little as three years ago I could lay my hands on a very good condition pre-remington Marlin 336 (30-30) for under $300 within a couple of hours just by visiting a few pawn shops within a 12-15 mile radius. In 2007, my son bought a very fine specimen for under $200 off a shelf, then foolishly traded it for... of all things.... a Norinco SKS. He still regrets that trade.

And, thanks AEA for your explination of the "issue". Marlin just ain't Marlin anymore. I'm hanging onto my 1973 model.


surv

edit to add:




a few years ago I decided to give it a face lift. The original 1973 owner had burned his name and the date all the way across the buttstock, and the receiver was down to "the white" and a bit pitted (no rust). The scope is original 1973 Bushnell "Sportview", and the bluing on one side is completely gone due to sun exposure in the "original owner's" rear pick-up window. When I acquired the gun several years ago I could easily shoot 1 inch groups POA at 100 yards. Three or four years ago I stripped it down to a pile of parts, stripped and sanded (particularly the "name/date) the wood and hand rubbed it for several weeks with light applications of Danish Oil. Since I did most of the metal sanding (reducing the bluing to "white"), a gunsmith buddy did the bluing (actually the receiver had to be bead blasted due to the pitting) and complete reassembly for $150. The refinish really wasn't necessary, and since it's a one of a million series it doesn't hurt it's historic value, but it's easier to take care of. Oh, it still shoots 1 MOA to POA. Don't be afraid to pick up a well used (not abused) Marlin 336.

[1s1k52]

Yeah sounds like used is the way to go with all the problems new ones have

[gwashorn]

I just got my 1980 336C yesterday from my FFL. Sure looking forward to taking it out. Great wood and metal on it. Looks just like your 1973 only mine without the scope. These sure are great all around rifles and classic looking.

[puma guy]

Yeah sounds like used is the way to go with all the problems new ones have

I advise you to be patient in your search. (not easy I know) Try pawn shops, LGS, are worth a try; even Cabela's has a good value in a used 336 every once and a while. Gunbroker and other web sales and auctions are a toss of the dice, but I have always had good luck. Do some research, look at the pictures and if the seller has lots of positive feedback you probably can rely on them. GB and Guns America have a lot of overpriced guns, but if you're willing to wait you can find a deal. Gunshows are a good place to look as well. Marlin made 336's for many sales outlets like Sears, Ward's, Western Auto, JC Penney etc. You can find deals on them for less than a Marlin would cost. They usually are fitted with birch stocks and are not quite as fancy but function just as well. Good luck.
Edit: You mentioned you wanted on with a crossbolt safety (actually I think it's a hammer block) so that narrows the window for year of manufacture to 1984 and Remlin. The JM proof mark is a good indicator. I think Remington closed the North Haven plant in 2010.

[Westfield]

I have a 1973 336 Marlin .35. Used it for hunting the heavy woods in New England. Love the rifle !