Safely chambering at home?

Gun, shooting and equipment discussions unrelated to CHL issues

Moderator: carlson1

User avatar

Spanky
Member
Posts in topic: 1
Posts: 95
Joined: Thu Feb 26, 2009 2:12 pm
Location: San

Re: Safely chambering at home?

#31

Post by Spanky »

Our Tempurpedic is great for sleeping on...but I sure do miss the springy/bounciness of the old mattress sometimes if you catch my drift. If the old mattress has good bounce to it ya might want to keep it in an extra bedroom for certain occasions.

FWIW I chamber my carry gun pointed right at the mattress all the time...never had an accidental discharge though (of the gun anyway).

boxermoose
Senior Member
Posts in topic: 1
Posts: 206
Joined: Sat Jan 12, 2013 9:10 pm

Re: Safely chambering at home?

#32

Post by boxermoose »

Leave a phone book on the floor of the closet?
User avatar

carlson1
Moderator
Posts in topic: 1
Posts: 11779
Joined: Sat Dec 03, 2005 1:11 am

Re: Safely chambering at home?

#33

Post by carlson1 »

I am not for sure what you mean by "guiding the slide", but you could be setting yourself up for a pistol that does not completely go into battery.
Image

Cedar Park Dad
Banned
Posts in topic: 1
Posts: 2064
Joined: Tue Jun 11, 2013 7:19 am
Location: Cedar Park Texas

Re: Safely chambering at home?

#34

Post by Cedar Park Dad »

As has been noted there are a couple of 'recipes' for simple bucket device with sand that should do the trick if this is a concern.
User avatar

Topic author
ATDM
Senior Member
Posts in topic: 14
Posts: 320
Joined: Fri Jun 28, 2013 11:17 pm
Location: TEXAS

Re: Safely chambering at home?

#35

Post by ATDM »

carlson1 wrote:I am not for sure what you mean by "guiding the slide", but you could be setting yourself up for a pistol that does not completely go into battery.
By "guiding the slide" I mean holding onto the slide when releasing and not letting it snap back under the spring's force. XD-s is the only one of my guns that doesn't go all the way back (leaves about 1/8") and keeps from fully chambering the round, unless I push it a little the rest of the way.

I do this only in a home setting to prevent unintended discharge, when chambering. I don't particularly like doing that, and in 30 years I had never had an unintended discharge until the XD-s ordeal. That's why I am looking for something safe, yet aesthetical to keel at home to point my guns at, when chambering.
I cling to my God — Jesus Christ.
I love my wife and kids.
I am proud to be an American and Texan.
And... I cling to my guns.

MotherBear
Senior Member
Posts in topic: 2
Posts: 421
Joined: Sun Feb 10, 2013 9:27 pm
Location: Near Austin

Re: Safely chambering at home?

#36

Post by MotherBear »

What about something like a Safe Direction academy pad? http://www.safedirection.com/" onclick="window.open(this.href);return false; It's supposed to contain a single round, so you'd be ordering a new one now, but it costs less than a mattress! Small, portable, unobtrusive. I haven't actually bought one (yet) but I've been meaning to get around to it for a good while. I guess I'll consider this thread the kick in the tail I needed.
User avatar

LAYGO
Senior Member
Posts in topic: 2
Posts: 632
Joined: Fri Oct 01, 2010 2:18 pm
Location: Cross Roads, TX (Denton Co)

Re: Safely chambering at home?

#37

Post by LAYGO »

MotherBear wrote:What about something like a Safe Direction academy pad? http://www.safedirection.com/" onclick="window.open(this.href);return false; It's supposed to contain a single round, so you'd be ordering a new one now, but it costs less than a mattress! Small, portable, unobtrusive. I haven't actually bought one (yet) but I've been meaning to get around to it for a good while. I guess I'll consider this thread the kick in the tail I needed.
Those are pretty cool.
S&W M&P 40 Mid (EDC) - S&W Shields (his/hers) - S&W M&P .45C - S&W 4513TSW .45 (1st Gen, retired to nightstand)
CMMG AR15 w/ACOG
Anderson AR15 pistol w/Aimpoint H1

08/04/2013 CHL class taken - plastic rec'd 08/26! Renewed 2018

MotherBear
Senior Member
Posts in topic: 2
Posts: 421
Joined: Sun Feb 10, 2013 9:27 pm
Location: Near Austin

Re: Safely chambering at home?

#38

Post by MotherBear »

By the way, I found the Safe Direction pad thing through a mention on the Cornered Cat website: http://www.corneredcat.com/article/prac ... -backstop/" onclick="window.open(this.href);return false;

She also suggests a 5-gallon bucket of sand, which you could disguise with a fake plant or something if aesthetics are an issue. Or a box of phone books stacked 2-3' deep. She's making suggestions for dry fire backstops, but the same principles should apply, I'd think.

OrangeAnimal
Member
Posts in topic: 1
Posts: 172
Joined: Sat May 05, 2012 10:24 pm

Re: Safely chambering at home?

#39

Post by OrangeAnimal »

Just wondering how many rounds had you fired thru the XDS before this occurred. I recently got one and now I guess I will send it in for repair.

I had something similar happen to me but it was an old FEG PA-63 9mm Mak. To the firearms defense I played with this one a little bit. I managed to get something not quite together right and the trigger was super touchy. I literally bumped it into my palm and it fired. Once again I am glad I never point any firearm at something I don't want to absolutely destroy. That time it was a small piece of trim and went inside of the wall. It was angled downwards and did not go thru the brick on the outside. Never took the wall apart to look for the bullet. So that was once in 20 years that I have ever experienced that. I don't want to do it again. Took 30 mins for my hearing to go back to somewhat normal.

Glad no one was hurt but your wallet. I for one would be without a place to sleep if I put a hole in ours. Stupid Sleep Number bed.
User avatar

Topic author
ATDM
Senior Member
Posts in topic: 14
Posts: 320
Joined: Fri Jun 28, 2013 11:17 pm
Location: TEXAS

Re: Safely chambering at home?

#40

Post by ATDM »

OrangeAnimal wrote:Just wondering how many rounds had you fired thru the XDS before this occurred.
By that time I had fired about 200 rounds at the range...
I cling to my God — Jesus Christ.
I love my wife and kids.
I am proud to be an American and Texan.
And... I cling to my guns.
User avatar

AdioSS
Senior Member
Posts in topic: 1
Posts: 512
Joined: Mon Feb 22, 2010 7:02 am
Location: 75707

Re: Safely chambering at home?

#41

Post by AdioSS »

I'd dig out the bullet & frame it to hang over whatever bullet trap you get so it would be a constant reminder.
User avatar

Excaliber
Moderator
Posts in topic: 2
Posts: 6198
Joined: Tue May 27, 2008 9:59 pm
Location: DFW Metro

Re: Safely chambering at home?

#42

Post by Excaliber »

MotherBear wrote:By the way, I found the Safe Direction pad thing through a mention on the Cornered Cat website: http://www.corneredcat.com/article/prac ... -backstop/" onclick="window.open(this.href);return false;

She also suggests a 5-gallon bucket of sand, which you could disguise with a fake plant or something if aesthetics are an issue. Or a box of phone books stacked 2-3' deep. She's making suggestions for dry fire backstops, but the same principles should apply, I'd think.
We used small gravel in the bottom 2/3 of our squad room safety setup to better stop and / or shatter high powered rifle rounds. The trap itself was a 3 foot section of city water pipe with a 90 degree CORRECTION: 45 DEGREE elbow on top. It was built into a frame with instructions on the front and a small shelf in front of the opening.

It's more than you'd want to see in your bedroom, but not a bad arrangement for a club or a range.
Excaliber

"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." - Jeff Cooper
I am not a lawyer. Nothing in any of my posts should be construed as legal or professional advice.
User avatar

Topic author
ATDM
Senior Member
Posts in topic: 14
Posts: 320
Joined: Fri Jun 28, 2013 11:17 pm
Location: TEXAS

Re: Safely chambering at home?

#43

Post by ATDM »

Excaliber wrote:
MotherBear wrote: We used small gravel in the bottom 2/3 of our squad room safety setup to better stop and / or shatter high powered rifle rounds. The trap itself was a 3 foot section of city water pipe with a 90 degree elbow on top. It was built into a frame with instructions on the front and a small shelf in front of the opening.

It's more than you'd want to see in your bedroom, but not a bad arrangement for a club or a range.
I need to find that a block of that gel looking substance I saw on CSI once... :lol:
I cling to my God — Jesus Christ.
I love my wife and kids.
I am proud to be an American and Texan.
And... I cling to my guns.

stroo
Senior Member
Posts in topic: 1
Posts: 1682
Joined: Fri Dec 15, 2006 11:46 pm
Location: Coppell

Re: Safely chambering at home?

#44

Post by stroo »

What kind of mattress do you have? I am really surprised that a matress would stop a bullet.
User avatar

Excaliber
Moderator
Posts in topic: 2
Posts: 6198
Joined: Tue May 27, 2008 9:59 pm
Location: DFW Metro

Re: Safely chambering at home?

#45

Post by Excaliber »

Correction to my safety station post below:

The elbow at the top was 45 degrees, not 90, so it would deflect an incoming round into the sand and gravel below.
Excaliber

"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." - Jeff Cooper
I am not a lawyer. Nothing in any of my posts should be construed as legal or professional advice.
Post Reply

Return to “General Gun, Shooting & Equipment Discussion”