Page 2 of 2
Re: Who likes nice shiny BRAND NEW looking brass?
Posted: Fri Aug 31, 2012 11:25 pm
by cyphur
Jumping Frog wrote:APynckel wrote:It's 250 every 4 hours, and 100% perfect sparkly shiny brass, and it's actually not much work. Much less than dealing with all that dry media. You dump your brass in, add the lemi shine and Dawn detergent, a gallon of water and the SS media, set the tumbler in motion, then seperate after 4 hours.
I did 500 pcs of .223. Started the vibratory tumbler on a timer, dumped into the media separator at the end, popped it into a baggy and done. Less than 5 minutes of total work.
No rinsing, no spreading it out on towels, no drying.
I tumbled this on Wednesday evening. I think this is clean enough for my purposes:
[
Image ]
I am sincerely happy that you have found an approach that works for you and you are happy with it. I have yet to be sold for my purposes.
Now, if I ever got around to building one of those home-built tumblers that would do about 15 lbs of brass at a time, I might look this over again.
Thumlers makes a 40# model you could probably use to spec one out.
Re: Who likes nice shiny BRAND NEW looking brass?
Posted: Sat Sep 01, 2012 12:50 am
by NcongruNt
cyphur wrote:
Thumlers makes a 40# model you could probably use to spec one out.
There's a kit for that as well:
http://www.stainlesstumblingmedia.com/s ... er-18.html" onclick="window.open(this.href);return false;
Runs about $800, though.
Re: Who likes nice shiny BRAND NEW looking brass?
Posted: Sat Sep 01, 2012 10:49 am
by cyphur
I saw that as well, but with the gentleman remarking about building his own, I figured he was either hoping to save a few bucks or enjoys projects. Either way the kit does not work for those criteria.
If I shot 1000 rounds a weekend I would go for a larger tumbler myself, 16 hours to clean brass is a bit much per week. At some point building your own becomes required.
Of course, at 20k cases a month, you are looking at a washing machine gutted and hooked up to a human-sized hampster wheel and hiring neighborhood kids for $8/hr to power it, lol.
Re: Who likes nice shiny BRAND NEW looking brass?
Posted: Wed Jan 09, 2013 10:16 pm
by rotor
I ordered one of these several weeks ago and it was backordered. Got a notice that it is being shipped today. I heard, maybe incorrectly as I am a newbie at reloading, that there is a significant risk of lead exposure with regular vibratory methods and that because this is a wet method there is little to no risk of lead exposure. Am I wrong about this? Lead contamination ( and I don't mean shooting ) is very bad news. Of course with the present primer situation I may never get past the depriming cleaning state.
Re: Who likes nice shiny BRAND NEW looking brass?
Posted: Wed Jan 09, 2013 11:32 pm
by mr surveyor
has the re-education system in this country been so effective to create such fear and hysteria?
Re: Who likes nice shiny BRAND NEW looking brass?
Posted: Thu Jan 10, 2013 1:20 pm
by rotor
Lead exposure
http://www.corneredcat.com/article/fire ... -exposure/" onclick="window.open(this.href);return false;
