Re: Pay It Forward.
Posted: Wed Dec 22, 2010 3:34 am
by goofwrench
I have a DarkEarth color ERGO grip
LEFT HANDED for a AR15 style rifle, purchased by mistake from a gunshow.
I figured out as soon as I installed it and grabbed my rifle my mistake. That thumb shelf digging between my index and middle finger was very uncomfortable... Glad to let a southpaw take it off my hands, so it will no longer be sitting on my desk annoying me.
Re: Pay It Forward.
Posted: Fri Jan 21, 2011 11:09 pm
by Dan20703
Been a long time. Back to the top. Don't know if it's correct but lots of good stuff still here!
1- 100 once fired Federal 9mm brass cases for the reloaders. - Courtesy of SQLGeek
2. Ak47 Thumbhole wood stock - Courtesy of rm9792
3. Uncle Mikes Kydex OWB Berreta 92 Holster - Courtesy of rm9792
4. Upper wood piece for M1 Carbine - Courtesy of rm9792
5. New in Box, all papers, Lee double cavity bullet mold, w/ handles. This is a 160 gr. bullet, .312 for 7.62X39.-Courtesy of longtooth
6. Fobus Paddle Holster for Sig P220. (Picture on page 9) Courtesy of rm9792
7. Rem-Choke 12ga Full Choke -courtesy of dicion
8. DVD of the following. My collection of firearm manuals in PDF format. Its about 2.3 gig worth, and has over 1200 high quality manuals, some of them very hard to find. Hoping this is within the rules since the manuals are largely public domain, and available at 1200 locations throughout the internet? Manufacturers models from Anschutz, Arcus, Armalite, Armscor, Astra, Autood, Ballester, Barrett, Benelli, Beretta, Bersa, Blaser, Bluegrass, Breda, Brno, Browning, Bushmaster, Caldwell, Century, CETME, Charles Daly, Charter, Clayco, CMP, Cobra, Cobray, Colt, Coonan, CVA, CZ, Daewoo, Dan Wesson, DPMS, Dragun, EAA, Ed Brown, Enfield, Enterprise, Fabarm, Firestorm, FN, Franchi, Freedom Arms, Glock, Heckler & Koch, H&R, Iai, Intratec, Ithaca, Iver Johnson, JC Higgins, Jennings, Kahr, KBI, Keltec, Keystone, Khan, Kimber, Llama, Magnum Research, Mannlicher, Marlin, Mas, Merkel, Mitchell, Mossberg, Nef, Norinco, North American Arms, Olympic, Para, Parker, Phoenix, Plainfield, Polytech, Radocy, Ramline, Remington, Robinson, Rossi, Ruger, Smith & Wesson, Sabatti, Safari, Sako, Sauer, Savage, Sig, Sphinx, Springfield Armory, Star, Sterling, Steyr, STI, Stoeger, Taurus, Thompson, Tikka, Valmet, Vector, Vostok, Walther, Wildey, and Winchester. Courtesy of lawrnk
9. a butler creek 33/34 Objective multiflex flip open scope cover. New in package. Courtesy of lawrnk
10. Ruger 10/22 wood stock-Courtesy of Capt Roy
11. Magazine cap with sling swivel for Browning BPS shotgun. courtesy of AustinRealtor
12. NIP set of 1" scope rings. Fit weaver styly base. "Tradition" brand sold by Academy-Courtesy of longtooth
13. Forty .300 WinMag brass in blue plastic case. -Courtesy of rm9792
14. 20-30 rounds of winchester 5.56 and 20 rounds of monarch .223 fmj but it has to be picked up in DFW if that works with the rules. Courtesy of Scott123
15. RCBS rifle die set in 6.5x55mm (aka 6.5 Swedish Mauser).. Courtesy of ghostrider
16. a .270 Remington magazine for the Browning A-Bolt rifle Courtesy of SgtMac
17. Flambeau 17" pistol pack case, courtesy of OverEasy
18. thumbhole wooden stock for ak/mak-Courtesy of bci21984
19. YHM thumb screw for EOTech YHM-9553, courtesy of AustinRealtor
20. USP Series Operator's Manual, black cover, bound, which comes with all USP series pistols.-Courtesy of The Annoyed Man
21. The "Shotlock" gun lock that comes with USP series pistols, black with red HK logo imprinted on lock body.Courtesy of The Annoyed Man
22. A left-handed holster body for Minotaur MTAC holster, fits USP Compact 9mm/.40 pistols.Courtesy of The Annoyed Man
23. A left-handed Fobus Paddle Holster, fits USP Compact 9mm/.40 pistols.Courtesy of The Annoyed Man
24. set of carbine-length stock handguards for an AR-15 style rifle. These are the black plastic type with heatshields.Courtesy of williamkevin
25. Box of Blazer .25ACP Courtesy of Carry-a-Kimber
26. composite forearm for a 20-gauge Mossberg pump shotgun (I'm assuming a 500c?) . Courtesy of austinrealtor
27. five new knives. . Courtesy of i8godzilla
28. Blackhawk CQC belt-slide holster for a SIG 200/229. This is an adjustable cant holster that has velcro and a tension screw for adjustment. Courtesy of garcia946
29. DarkEarth color ERGO grip LEFT HANDED for a AR15 style rifle. Courtesy of goofwrench
Re: Pay It Forward.
Posted: Wed Feb 02, 2011 11:12 pm
by Bonc_CHL
Is there pics of 2. Ak47 Thumbhole wood stock - Courtesy of rm9792 and 18. thumbhole wooden stock for ak/mak-Courtesy of bci21984
thanks
Re: Pay It Forward.
Posted: Wed Feb 23, 2011 1:30 pm
by A-R
lawrnk wrote:Wish I'd been watching this thread before today! I have lots more.
I'd like to claim the "full set of colored front sights for AK rifle (tapco brand)-Courtesy of bci21984"
I'm offering something sorta unique. It's a full police officers leather belt, holster, revolver speed loader pouches, 2 speedloaders, medium size revolver holster, hand cuff pouch, the belt, and misc other things on the belt whose purpose I dont know. Photo below. Hopefully a cop here needs one, or simply fufill your dream of being a mall ninja
. Every thing is leather,and bianchi. Part # for the revolver holster is #350 hurricane patented. I can offer part numbers on all the rest by request. Lots on here. Edited: revolver holster fits Llama Martial, Comanche .357 - 4 inch bbl. Ruger GP100 - 4 inch bbl. ,Smith & Wesson Military & Police 10, 12, 13, 15, 64, 65, K - Frame ,Combat Magnum 15, 18, 19, 48, 66, 67, K - Frame ,Dist. Combat Master 581, 585, 681, 686, L - Frame ,Taurus 65, 66, 80, 82, 83, 669, 689 and 425 Tracker
austinrealtor wrote:Hello again, two in a row for me.
I'm going to claim:
19. a full police officers leather belt, holster, revolver speed loader pouches, 2 speedloaders, medium size revolver holster, hand cuff pouch, the belt, and misc other things on the belt whose purpose I dont know. Photo page 22. Hopefully a cop here needs one, or simply fufill your dream of being a mall ninja . Every thing is leather,and bianchi. Part # for the revolver holster is #350 hurricane patented.-Courtesy of lawrnk
And put up two items:
1. an EOTech replacement thumb screw from Yankee Hill Machine part #YHM-9553. Bought this for my 516, but apparently it is meant as a replacement for for the allen screws used on other models like 512 etc.
2. A LEFT-HANDED Safariland 328-39-62 black leather pancake holster for a Smith & Wesson Sigma. I grabbed this dirt cheap off a clearance rack thinking it was for an M&P (didn't look closely at the details) and that I might use it as a "just in case" lefty holster if I end up needing carpal tunnel surgery at some point on my right wrist. Anyway, obviously the M&P doesn't fit. Did try to squeeze my Glock in there and it almost fit but the retention strap wouldn't close. If you worked on the trigger guard area of the holster a bit I think you could likely squeeze a Glock into it. Or possibly a Ruger SR9? Taurus? Anyway, it's up for grabs.
Does anyone know lawrnk? I have never heard back from him on this claim and sent him two PMs with no response (he apparently doens't have have his membership status set to receive emails from other members).
Planning to shoot some IDPA revolver soon and was hoping to use some of this gear for that.
Re: Pay It Forward.
Posted: Thu Mar 24, 2011 10:54 am
by mdthrash
rm9792 wrote:I want the FAL bayonet, it should fit mine. That makes 3 items claimed. I have some more holsters and stuff i can list:
2 Fobus Paddle Holsters, 1 1911 and 1 Sig P220
3 Shoulder Holsters. Had a hard time finding one I liked. Protech and Crosman are horizontal carry, all 3 are gun on left 2 spare mags in right armpit.
Ace Case
WRB
Protech Outdoors
I'll take the Fobus paddle holster for the Sig P220, assuming it is still available and will fit my 226R. Pictures no longer work, so I can't see what it looks like.
If the above is true, I have a Blade Tech S&W M&P (4.25" or smaller, won't fit the Pro 5", or M&P-L) to put up.
Re: Pay It Forward.
Posted: Thu Mar 31, 2011 4:03 pm
by HotLeadSolutions
mdthrash wrote:rm9792 wrote:I want the FAL bayonet, it should fit mine. That makes 3 items claimed. I have some more holsters and stuff i can list:
2 Fobus Paddle Holsters, 1 1911 and 1 Sig P220
3 Shoulder Holsters. Had a hard time finding one I liked. Protech and Crosman are horizontal carry, all 3 are gun on left 2 spare mags in right armpit.
Ace Case
WRB
Protech Outdoors
I'll take the Fobus paddle holster for the Sig P220, assuming it is still available and will fit my 226R. Pictures no longer work, so I can't see what it looks like.
If the above is true,
I have a Blade Tech S&W M&P (4.25" or smaller, won't fit the Pro 5", or M&P-L) to put up.
Ill take the blade tech holster for the M&P
I am offering 200 9mm brass cases (already tumbled)
Re: Pay It Forward.
Posted: Sun Apr 03, 2011 8:53 pm
by AR Traveler
First run through came up with two tins of 22 pellets, 1 new box of 22 shot shells, SKS top handguard that counts towards your part count for US manufacture. Holsters coming once I can brave the monsters lurking in the garage:)
Re: Pay It Forward.
Posted: Sat Aug 13, 2011 4:03 pm
by ghostrider
bumping.
its been a while since there's been any activity on this thread.
Re: Pay It Forward.
Posted: Sat Aug 13, 2011 11:08 pm
by papajohn1964
Just found this thread...subscribing!
Re: Pay It Forward.
Posted: Sun Aug 14, 2011 10:53 pm
by strider67
papajohn1964 wrote:Just found this thread...subscribing!
Me too...thanks USA1!
Re: Pay It Forward.
Posted: Sun Aug 21, 2011 10:39 pm
by rm9792
I forgot about this thread! i will send pics to those wanting my stuff. I would like the .25acp ammo and the 9mm brass. I am going to add some more stuff probably, cleaning out drawers of stuff.
Re: Pay It Forward.
Posted: Sun Oct 16, 2011 10:16 am
by Mahzik
Just stumbled on this thread. This is a great idea! Just subscribed and looking forward to finding some neat goodies!
Re: Pay It Forward.
Posted: Sun Oct 16, 2011 3:11 pm
by longtooth
#5
Dont know how this got missed but this mold has been sent out. Seems I remember it taking place in PM & I forgot to post it.
Sorry. Since it is goo I will get something else up & hope we can start to play again.
LT
Re: Pay It Forward.
Posted: Sun Oct 16, 2011 3:57 pm
by longtooth
Since there has been some "no response" & so long since it has been up what do yall think about starting a new list of offerings so everyone who is in will know that everything on the board is fresh, available, current & participating?
What about it Dan???
Re: Pay It Forward.
Posted: Sun Oct 16, 2011 4:02 pm
by Domineaux
longtooth wrote:Since there has been some "no response" & so long since it has been up what do yall think about starting a new list of offerings so everyone who is in will know that everything on the board is fresh, available, current & participating?
What about it Dan???
Yeah a "Pay it Forward II" thread makes sense.
