WTS: FN FNH FNX-45ACP Black
Posted: Fri May 03, 2013 11:02 am
SOLD
FNH FNX-45 Black
I've owned this pistol for two months and I've shot about 200 rounds through it. I'm selling it because the pistol is too big for my hand. I've added FNH FNX Trijicon Night sights ($100) and 4 flat magazine base pads ($30). With the flat base pads, the pistol hold 14+1 rounds. The curved base pads makes it 15+1. The gun ran 100%. The specs and features are below:
http://www.fnhusa.com/index.php?cID=508
FNX™-45:
The FNX™-45 is the result of years of innovative product development and advanced engineering techniques. Modeled after the FNP-45 service pistol introduced in 2007 under the U.S. Joint Combat Pistol Program, the FNX™-45 is a double-action/single-action hammer-driven pistol with highly enhanced ergonomics. Its manual safety/decocking levers, slide stop lever and magazine release are all fully ambidextrous for ease of operation with either hand and from any firing position. Both the slide and barrel are stainless steel. The FNX™-45’s checkered polymer frame has multiple interchangeable backstraps with lanyard eyelets. A MIL-STD 1913 mounting rail on the underside accepts tactical lights and lasers.
tech specs:
Caliber: .45 ACP
Operation: DA/SA
Sights: Fixed 3-Dot
Magazine Capacity: 15 rounds
Weight: 33.2 oz. empty
Width: 1.58″
Height: 6.3″
Barrel Length: 4.5″
Overall Length: 7.4″
Twist Rate: 1:16″ RH
Made in the USA
Features:
SLIDE
Stainless steel construction
External extractor with loaded chamber indicator
Front and rear cocking serrations
BARREL
Cold hammer-forged stainless steel
Polished chamber and feed ramp
FRAME
Polymer
Replaceable steel rails
Two interchangeable backstraps with lanyard eyelets
MIL-STD 1913 accessory mounting rail
Serrated trigger guard
OPERATING CONTROLS
Ambidextrous decocking/safety lever, slide stop lever and magazine release
MAGAZINE
Polished nickel coated steel body
Low-friction follower
Polymer base pad
SIGHTS
Fixed 3-Dot
FNH FNX-45 Black
I've owned this pistol for two months and I've shot about 200 rounds through it. I'm selling it because the pistol is too big for my hand. I've added FNH FNX Trijicon Night sights ($100) and 4 flat magazine base pads ($30). With the flat base pads, the pistol hold 14+1 rounds. The curved base pads makes it 15+1. The gun ran 100%. The specs and features are below:
http://www.fnhusa.com/index.php?cID=508
FNX™-45:
The FNX™-45 is the result of years of innovative product development and advanced engineering techniques. Modeled after the FNP-45 service pistol introduced in 2007 under the U.S. Joint Combat Pistol Program, the FNX™-45 is a double-action/single-action hammer-driven pistol with highly enhanced ergonomics. Its manual safety/decocking levers, slide stop lever and magazine release are all fully ambidextrous for ease of operation with either hand and from any firing position. Both the slide and barrel are stainless steel. The FNX™-45’s checkered polymer frame has multiple interchangeable backstraps with lanyard eyelets. A MIL-STD 1913 mounting rail on the underside accepts tactical lights and lasers.
tech specs:
Caliber: .45 ACP
Operation: DA/SA
Sights: Fixed 3-Dot
Magazine Capacity: 15 rounds
Weight: 33.2 oz. empty
Width: 1.58″
Height: 6.3″
Barrel Length: 4.5″
Overall Length: 7.4″
Twist Rate: 1:16″ RH
Made in the USA
Features:
SLIDE
Stainless steel construction
External extractor with loaded chamber indicator
Front and rear cocking serrations
BARREL
Cold hammer-forged stainless steel
Polished chamber and feed ramp
FRAME
Polymer
Replaceable steel rails
Two interchangeable backstraps with lanyard eyelets
MIL-STD 1913 accessory mounting rail
Serrated trigger guard
OPERATING CONTROLS
Ambidextrous decocking/safety lever, slide stop lever and magazine release
MAGAZINE
Polished nickel coated steel body
Low-friction follower
Polymer base pad
SIGHTS
Fixed 3-Dot