Gummy bear body armor allows only 1" of penetration.
Posted: Thu May 01, 2014 1:21 am
http://all-kvn.ru/video?watch=RF94eF9Mal9OdVE%3D
The above video is 4 minutes, 18 seconds long. I had initially seen a shortened version
on the "SCI"ence channel.
Bullet used : .22 LR, Stinger, 32 grains, JHP, 1640 FPS (feet per second).
Firearm used: Ruger 10/22 PS90. It's got a scope, which was not needed for the point blank shot.
Conclusion - The thick viscous nature of the smaller gummy bear in front allowed minimal penetration
of the round, protecting the larger gummy bear behind. A pistol would probably have a slower FPS.
Over and out. Enjoy. :-)
SIA
The above video is 4 minutes, 18 seconds long. I had initially seen a shortened version
on the "SCI"ence channel.
Bullet used : .22 LR, Stinger, 32 grains, JHP, 1640 FPS (feet per second).
Firearm used: Ruger 10/22 PS90. It's got a scope, which was not needed for the point blank shot.
Conclusion - The thick viscous nature of the smaller gummy bear in front allowed minimal penetration
of the round, protecting the larger gummy bear behind. A pistol would probably have a slower FPS.
Over and out. Enjoy. :-)
SIA
