Let's talk IWB holsters for a minute...

Holsters, sights, magazines, etc.

Moderators: carlson1, Keith B

Post Reply
propellerhead
Senior Member
Posts: 917
Joined: Tue May 09, 2006 9:12 am
Location: The part of Texas that isn't like Texas

Post by propellerhead »

It looks like it worked out, Cosmo 9!

I only raised the clip just under an inch. That little bit was enough to put more of the gun under and below the belt. Now it doesn't feel like the top end can lean outwards and fall out. I probably should have attached the clip just a little bit more to the left as shown in the photo. That should help rotate the pistol clockwise looking down to help avoid the base of the magazine from sticking out. I might pick up another $11 Uncle Mike's IWB and try it again. Thanks for the recommendation!

Before and after:

Image Image
Top
Cosmo 9
Senior Member
Posts: 549
Joined: Tue Dec 13, 2005 2:43 pm
Location: Lewisville, TX

Post by Cosmo 9 »

Glad to help. My thinking was for 10.00 who cares if I mess it up. I like mine so much I keep a spare in the holster drawer.
These Pretzels are making me thirsty!
Top
AC
Member
Posts: 57
Joined: Fri May 26, 2006 5:42 pm
Location: Lubbock, Texas

Post by AC »

Just got my Milt Sparks Watch Six today to go with my Rafter S belt. Now I need to break 'em in. Holster is a little tight right now!
Image
Top
Jfreeman
Junior Member
Posts: 41
Joined: Thu Aug 10, 2006 12:43 pm
Location: Plano

Post by Jfreeman »

NICE! My Watch 6 was very tight when it was new but before you know it the holster will be perfect
Top
HOSSISFREE
Member
Posts: 194
Joined: Wed Mar 22, 2006 7:26 pm
Location: Huntsville, TX

Post by HOSSISFREE »

I could recommend the G-Code IWB setup from Gunnersalley.com, as that is what I use to carry my H&K USP 45, but I'll confuse you with a little more than that. :o

http://www.geocities.com/ryangills/holsters.html

A list of holster sites I've compiled. I'm sure you can find all that have been mentioned, and many more.

Hoss
..." it is the Right of the People to alter or to abolish it, and to institute new Government, laying its foundation on such principles and organizing its powers in such form, as to them shall seem most likely to effect their Safety and Happiness." ~ Declaration of Independence!
Top
PPM
Member
Posts: 84
Joined: Fri Mar 17, 2006 8:18 am
Location: Tomball, TX area
Contact:
Contact PPM

Post by PPM »

Well, I TRIED the Versa Max 2 but I got WAY tired of fighting the clips. Just wasn't what I'll call "user friendly." (Adon acted as my representative and bought if from one of YOU guys, as a matter of fact.) My son LOVES his, however.

I've replaced MINE with the C.T.A.C. from Comp-Tac. Super thin and comfortable and the clips are MUCH easier on the fingers (making it exponentially easier to both put on...and remove. Combine that with the fact that it's super adjustable and I'm in love!

Speakin' of the Versa Max 2, any one interested in buying the entire set-up from me? It's been worn with my Ultra CDP, MAYBE 5 times? Have both the clips, loops and the little tool. Original zip lock bags included, too! Could be considered NEW.

As I recall, I payed $126.50 USD to Tom Norton? I'll accept $120 for it and ship it to you. PM me if you're interested.
PPM
(Pistol Packin' Momma)
Otherwise known as "Dickson"
Thunder Tactical Shooters
Top
Post Reply

Return to “Holsters & Accessories”