Win NT Brass small primer 45ACP

For those who like to roll their own.

Moderators: carlson1, Charles L. Cotton

Post Reply
T.O.M.
Junior Member
Posts: 40
Joined: Mon Aug 17, 2009 7:13 pm

Win NT Brass small primer 45ACP

Post by T.O.M. »

Has any one worked up a load for 45ACP with the NT WIN brass . Is it reloadable ? It has a larger flash hole
BobCat
Senior Member
Posts: 911
Joined: Wed Dec 29, 2004 3:33 pm
Location: East Bernard, TX

Re: Win NT Brass small primer 45ACP

Post by BobCat »

According to what I've read it is supposed to be reloadable - you might check with Winchester, they might go out on a limb and confirm that - but I just put them aside since there aren't many in what I pick up.

The ones with the smaller-diameter primer pocket are the real problem; I put them in with spent .22 and neck-cracked cases for remelt.

Regards,
Andrew
Retractable claws; the *original* concealed carry
philbo
Banned
Posts: 555
Joined: Fri Apr 07, 2006 9:36 am

Re: Win NT Brass small primer 45ACP

Post by philbo »

T.O.M. wrote:Has any one worked up a load for 45ACP with the NT WIN brass . Is it reloadable ? It has a larger flash hole
It's reloadable. I separate them and when I have enough I load my normal practice round using 4.4 grains of Titegroup under a 230 grain FMJ or plated bullet. Great for range use when I don't intend to pick up the brass.
Post Reply

Return to “Reloading Forum”