WTS: Holster, Reloading and Bullet Casting Gear

[cbunt1]

I am selling off some of my casting and reloading gear that I’m simply not using anymore. It’s all serviceable, and much is in like-new condition. This gear would make a great “Starter set” for someone who wants to get into bullet casting. Just add a melting pot, a ladle, a heat source, and some used wheel weights, and you’ll never be out of bullets, or worse, have 3 boxes of the wrong size again!

I also have a Don Hume H-721 Pancake holster for a 5” 1911, in a reddish-brown/cordovan color. Has a little wear from being used.--SOLD

The Molds have been cleaned up, and are ready to go to work. The Lee 2-Cavity molds come with factory-attached handles. The Lee 6-Cavity molds were originally sold without handles, however, I am INCLUDING Lee handles with them (unless the buyer requests otherwise).

I have the following Lee 2-cavity molds for sale (All in original box):
1) Lee 358-158 RF (#90303) – 158 grain .38 Spl/.357 Mag. Flat nose--SOLD
2) Lee 358-148-WC (#90312) – 148 grain .38 Spl/.357 Mag Full Wadcutter (Button-Nose)
3) Lee 452-230-TC (#90290) – 230 grain .45 ACP/Colt Truncated Cone. This mold has a damaged cavity from my amateurish attempt to remove the bevel base. The other cavity is intact, and the whole thing may be salvageable to someone with a lathe/press and some patience.--SOLD
4) Lee TL358-158-SWC (#90321) – 158 grain .38 Spl/.357 Mag Semi-Wadcutter (Keith-style profile) with Microgrooves for Tumble-living
5) Lee 356-120-TC (#90239) – 120 grain 9mm Truncated Cone--SOLD
6) Lee 452-228-1R (#90351) – 228 grain .45 ACP/Colt Round Nose, similar to jacketed hardball profile--SOLD
7) Lee TL452-200-SWC (#90463) – 200 grain .45 ACP/Colt Semi-Wadcutter, Profile very similar to the classic H&G 68 bullet. This mold has micro-grooves for tumble lubing

I have the following 6-Cavity molds for sale:
1) Lee 452-230-TC (#90289) – 230 grain .45 ACP/Colt Truncated Cone. Original box included.
2) Lee 452-200-SWC (#90310) – 200 grain .45 ACP Semi-Wadcutter. This bullet is very similar to the classic H&G 68 bullet, with some minor differences in the nose profile. Original box included.
3) Lee 358-140 SWC (#90317) – 140 grain .38 Spl/.357 Mag Semi-Wadcutter. The profile is very similar to the “standard” Keith-style wadcutter, but in a 140 grain bullet rather than the “traditional” 158-grain bullet. Box not included

I have six (6) Lee push-through sizing dies for sale. All include the die, punch, catch/storage box, and a bottle of Lee Liquid Alox lubricant. These mount to any standard single-stage press, and let you size and lubricate cast bullets without dedicated equipment. Sizes are: .309, .356(sold), .357, .358(sold), .451(sold) and .452(SOLD).

I have a Lee Carbide 3-Die set for 45-HP. The 45HP is a slightly shortened version of the .45 ACP, for those countries where civilians cannot own “military” calibers. I originally purchased these dies when .45 ACP dies were unavailable, and have used them to load 1000’s of .45 ACP cartridges, in the same way you would load .357 Magnum cartridges with a .38 Special die set. The die set is complete with resizing/decapping die, powder-through-expanding die, and seat/crimp die. It also includes a #2 Shell holder, a .5cc powder measure, and the original instruction leaflet. In short, it is the way it came to me from the Lee factory.

I have an RCBS Carbide 3-die set for 9mm, in its original die box. It includes the resizing/decapping die, expanding/belling die, and the seating/crimp die, along with an extra seating stem for truncated-cone bullets. The original paperwork is included.

I have two (2) 4-hole turrets for the Lee Classic Turret Press for sale

I would prefer to do FTF but am also willing to ship—I just don’t know what the shipping costs would be. I’m in Houston, but travel to Dallas every couple of weeks.

Pricing is as follows:
Lee Sizing Kits -- $15.00 each
2-Cavity Molds – 15.00 each ($5 for the 230/TC with a damaged cavity)
6-Cavity Molds – Includes handles -- $40
RCBS Carbide Die Set -- $40.00
Lee Carbide Die Set -- $20.00
Lee 4-Hole Turrets -- $10.00 each
Holster -- $20.00

--Edited to reflect sold merchandise--

[Rex B]

I'll take these:

1) Lee 358-158 RF (#90303) – 158 grain .38 Spl/.357 Mag. Flat nose
5) Lee 356-120-TC (#90239) – 120 grain 9mm Truncated Cone
6) Lee 452-228-1R (#90351) – 228 grain .45 ACP/Colt Round Nose, similar to jacketed hardball profile
Lee push-through sizing dies .309, .357, .451

ship, or I might can meet next time you are in DFW.

[cbunt1]

I'll take these:

1) Lee 358-158 RF (#90303) – 158 grain .38 Spl/.357 Mag. Flat nose
5) Lee 356-120-TC (#90239) – 120 grain 9mm Truncated Cone
6) Lee 452-228-1R (#90351) – 228 grain .45 ACP/Colt Round Nose, similar to jacketed hardball profile
Lee push-through sizing dies .309, .357, .451

ship, or I might can meet next time you are in DFW.

PM sent.

[cbunt1]

Update and Friday Bump!

I still have both sets of reloading dies, all three 6-cavity molds, three of the 2-cavity molds, the .309 and .357 sizing dies, and the 4-hole turrets available.

Thanks for looking!

[teraph]

just received the mold, the holster and the sizing die today. thanks a lot