Taurus cleaning

So that others may learn.

Moderators: carlson1, Keith B, Charles L. Cotton

Post Reply
User avatar
RetNavy
Senior Member
Posts: 515
Joined: Wed Jan 08, 2014 9:21 am
Location: Paris, Tx

Taurus cleaning

Post by RetNavy »

Had a couple of FTF while shooting my wife's .40 PT-100 so decided to disassemble the magazine. First my manual dexterity is not the greatest now with my ALS so first problem was the screw holding the base on, then getting the base off, then after cleaning putting the follower back in right, then putting that itsy bitsy scew back in the base... Think I just buy a new mag after this :biggrinjester:
"Freedom itself was attacked this morning by a faceless coward. Freedom will be defended!"
-President George W. Bush, September 11, 2001
User avatar
joe817
Senior Member
Posts: 9316
Joined: Fri May 22, 2009 7:13 pm
Location: Arlington

Re: Taurus cleaning

Post by joe817 »

RetNavy wrote:Had a couple of FTF while shooting my wife's .40 PT-100 so decided to disassemble the magazine. First my manual dexterity is not the greatest now with my ALS so first problem was the screw holding the base on, then getting the base off, then after cleaning putting the follower back in right, then putting that itsy bitsy scew back in the base... Think I just buy a new mag after this :biggrinjester:
I think I'd do the same thing! Save on the frustration & stress. :cheers2:
Diplomacy is the Art of Letting Someone Have Your Way
TSRA
Colt Gov't Model .380
Post Reply

Return to “Never Again!!”