tumbling

For those who like to roll their own.

Moderators: carlson1, Charles L. Cotton

NORMAN
Member
Posts: 147
Joined: Wed Apr 22, 2009 2:08 pm

tumbling

Post by NORMAN »

hey guys- sorry for the dumb question but what is an average time to tumble pistol brass ?
User avatar
Oldgringo
Senior Member
Posts: 11203
Joined: Sat Mar 08, 2008 10:15 pm
Location: Pineywoods of east Texas

Re: tumbling

Post by Oldgringo »

There are no dumb questions but Boy Howdy, you should see some of the answers. :smilelol5:

I tumble my pistol cases a couple of hours or so with a cap of car polish. Do a search for "tumbling" in this forum and you'll be overwhelmed with info and opinons.

Pssst, :coolgleamA: you got any pistol primers?
longtooth
Senior Member
Posts: 12329
Joined: Sun Jun 12, 2005 3:31 pm
Location: Angelina County

Re: tumbling

Post by longtooth »

Look out now. Some of them answers are mine. :oops:

If it is range pick up like I get a lot of & dirty I add a couple of hrs. Use polish too. :thumbs2:
Image
Carry 24-7 or guess right.
CHL Instructor. http://www.pdtraining.us" onclick="window.open(this.href);return false;
NRA/TSRA Life Member - TFC Member #11
NORMAN
Member
Posts: 147
Joined: Wed Apr 22, 2009 2:08 pm

Re: tumbling

Post by NORMAN »

hey guys, thanks for the info and your right i did a "tumbling" search and wow it sounds like maybe i should take my brass to the carwash !!!

A couple of more questions: how ofton do youchange your media ? If you don't tumble for awhile can you save used media in a zip lock? and last but not least once you have tumbled how do you seperate your media from clean brass without buying a seperator etc. ???
User avatar
Oldgringo
Senior Member
Posts: 11203
Joined: Sat Mar 08, 2008 10:15 pm
Location: Pineywoods of east Texas

Re: tumbling

Post by Oldgringo »

I'm using the same media I started with last fall but I'm not a production reloader. I'll be interested in the answer to this question as well as hear comments on Walnut vs Corn Cob media.
User avatar
tfrazier
Senior Member
Posts: 657
Joined: Tue May 08, 2007 8:02 pm
Location: 1308 Laguna Vista Way, Grapevine, Texas 76051
Contact:

Re: tumbling

Post by tfrazier »

I change my tumbling media after every 1000 reloads. I use a squirt of Turtle Wax brand Liquid Clay Bar with each cycle.

As far as my other media, I haven't changed it since Fox news first went on the air... :smilelol5:
User avatar
CDH
Member
Posts: 164
Joined: Wed Mar 25, 2009 9:48 pm
Location: Corpus Christi

Re: tumbling

Post by CDH »

You tumble until it's clean enough for your needs.

I am not making jewelry, so I tumble for a half hour or so to remove grit (rifle), then size, and it there is an unacceptable level of carbon and/or tarnish, I put them back in the tumbler for a couple of hours. Check and tumble more if needed. Repeat as necessary...

For pistol brass I do all the tumbling before sizing, but with the same check periodically and continue.

Media lasts a lot longer than you think, but it starts taking longer and longer to clean... Once again, find your own preference. I get probably 7-14 days of total tumbling time from my vibratory unit before I toss the media depending on how grungy of cases I am trying to clean up.
No damage control is ever as good as prevention.
User avatar
MoJo
Senior Member
Posts: 4899
Joined: Thu Dec 23, 2004 6:10 pm
Location: Vidor, Tx
Contact:

Re: tumbling

Post by MoJo »

Tumble till it is as clean as you want it. Here's a few tips I'v picked up over the years.

Grungy range brass. Decap with a DECAPING die soak in a mixture of 1 Qt white vinegar and 1 tablespoon salt for about 30 minutes, Rinse well with hot water and set out in the sun to dry or, put in oven at 200 degrees until dry. Tumble as usual.

Media, you can use the ready mix or you can make your own, I prefer to do the latter. I buy corn cob and walnut hull at the pet store, it is sold for litter in bird cages etc. Add the polish of your choice (Turtle Wax is good) go to town. Medium grain rice makes a good media for cleaning very dirty brass and is cheap. Don't use Brasso the ammonia in Brasso will weaken your brass. If I am wanting really shiny brass I do it in two steps, first run in walnut second in corn cob. Walnut is more aggressive corn cob polishes better.

I use an old basket out of a deep fryer for a separator. You can also build a simple wooden frame and attach hardware cloth to sift your brass and media. Use the 1/4" mesh the 1/2" mesh won't hold all the brass back.
"To disarm the people is the best and most effectual way to enslave them."
George Mason
Texas and Louisiana CHL Instructor, NRA Pistol, Rifle, Shotgun, Personal Protection and Refuse To Be A Victim Instructor
powerboatr
Senior Member
Posts: 2276
Joined: Mon Mar 23, 2009 9:53 pm
Location: North East Texas

Re: tumbling

Post by powerboatr »

concur i tumble till its clean enough for me, which is purt near new looking.
our range is outside so all of my brass gets a bit of sand
it get tumbled in my dirty media first then the tumble in the cleaner stuff, as it ages the clean goes in the dirty bucket and the dirty goes in the yard, for some reason it keeps the deer out of my gardens ????
Proud to have served for over 22 Years in the U.S. Navy Certificated FAA A&P technician since 1996
Gyrogearhead
Senior Member
Posts: 246
Joined: Tue Sep 04, 2007 5:50 pm
Location: Seabrook, TX

Re: tumbling

Post by Gyrogearhead »

MoJo wrote: Media, you can use the ready mix or you can make your own, I prefer to do the latter. I buy corn cob and walnut hull at the pet store, it is sold for litter in bird cages etc. Add the polish of your choice (Turtle Wax is good) go to town. Medium grain rice makes a good media for cleaning very dirty brass and is cheap.
MoJo, Is there some reason not to use medium grain rice for fairly clean brass that need a bit of a polish? Does it leave micro-scratches or something? I really like your ideas and was wondering if other things around the house would make satisfactory media, like maybe rice and sawdust. What other things have you tried? I'd like to learn from your experience at this as I have never experimented in this area before. :cheers2:
"With atomic weapons, as in many other things, knowing what to do isn't nearly so important as knowing what NOT to do." -- J. Robert Oppenheimer, 1946

Wisdom comes from reading the instructions. Experience comes from not reading them!
Rifleman55
Member
Posts: 109
Joined: Sun Apr 12, 2009 9:21 pm

Re: tumbling

Post by Rifleman55 »

I use corncob media with Dillon polish, I usually run my brass a couple of hours. I have a Dillon vibratory cleaner and a Dillon separater. Before I bought the separater I used a couple of methods, one was an old kitchen colander, it worked bet was messy. If you use a Dillon separater you won't use anything else.
User avatar
MoJo
Senior Member
Posts: 4899
Joined: Thu Dec 23, 2004 6:10 pm
Location: Vidor, Tx
Contact:

Re: tumbling

Post by MoJo »

Gyrogearhead wrote:
MoJo wrote: Media, you can use the ready mix or you can make your own, I prefer to do the latter. I buy corn cob and walnut hull at the pet store, it is sold for litter in bird cages etc. Add the polish of your choice (Turtle Wax is good) go to town. Medium grain rice makes a good media for cleaning very dirty brass and is cheap.
MoJo, Is there some reason not to use medium grain rice for fairly clean brass that need a bit of a polish? Does it leave micro-scratches or something? I really like your ideas and was wondering if other things around the house would make satisfactory media, like maybe rice and sawdust. What other things have you tried? I'd like to learn from your experience at this as I have never experimented in this area before. :cheers2:
The rice doesn't polish as well as walnut hull and corncob but boy does it clean! Put a little chrome polish in with it or even some dry Bon Ami scrubbing powder and see all the black and tarnish dissapear! I use rice on grungy range brass that has been out in the weather or is muddy.

There are a lot of things that will work that are free or low cost. As you mentioned, sawdust especially hardwood sawdust will polish to an almost jewel like finish if that's what you want. I just want my brass clean and semi shiney for the most part. To speed up the cleaning you can add a few wooden blocks to the tumbler also. Something like some 1X2 cut 2" long 6-8 of them will really keep things stirred up.
"To disarm the people is the best and most effectual way to enslave them."
George Mason
Texas and Louisiana CHL Instructor, NRA Pistol, Rifle, Shotgun, Personal Protection and Refuse To Be A Victim Instructor
User avatar
tfrazier
Senior Member
Posts: 657
Joined: Tue May 08, 2007 8:02 pm
Location: 1308 Laguna Vista Way, Grapevine, Texas 76051
Contact:

Re: tumbling

Post by tfrazier »

I tried tumbling with rice but it just made a big mess. Tried two kinds, steamed and fried rice, both just gummed everything up.
User avatar
hi-power
Senior Member
Posts: 748
Joined: Wed Nov 22, 2006 10:43 am
Location: Grapevine, TX

Re: tumbling

Post by hi-power »

tfrazier wrote:I tried tumbling with rice but it just made a big mess. Tried two kinds, steamed and fried rice, both just gummed everything up.
:smilelol5:
Post Reply

Return to “Reloading Forum”