Well, I've decided to reload now since I'm shooting IDPA and will be shooting more often. Hopefully, this saves me a few bucks in the process. Right now, I'm only reloading 9mm but will add .45 and .223 when I get more comfortable and funds allow. So far, I've got a LEE classic 4 turret press and an RCBS 750 digital scale. A Lyman tumbler cleans up the brass while I work the turrets in my bullet slinger. I just started tonight and figured I'm loading about a round a minute. Not near the speed of a progressive setup, but it's only a quarter of the price and I'm only reloading for ME.
I've chosen Hodgdon Titegroup and Winchester bullets for now. Cabella's had the bullets for $6.99/100. I'm working on setting up my load and got some data from Hodgdon. I figured I'd start slightly under the reccomended load (gr) until I get it where I want it. I made several attempts using unprimed cases before getting the press set up to the correct measurements. I think I finally have it figured out which is the crimp and seating depth on the die. (it's s two in one die) Took a bit to figure out.
