XL 650 Shellplate caps
Moderators: carlson1, Charles L. Cotton
XL 650 Shellplate caps
There are 5 plastic caps on top of the shellplate which I seem to have extra with my spare parts kit, my question is what do they do and how do you keep them in place? I thought they snapped in but that is not the case.
In the endless pursuit of perfection, we may achieve excellence.
Texas LTC and School Safety Instructor and NRA Training Counselor
Texas LTC and School Safety Instructor and NRA Training Counselor
Re: XL 650 Shellplate caps
What do you mean by caps can you find the part on Dillon's web site and a different name of the part
Re: XL 650 Shellplate caps
Dillon part number 14050 shellplate cap, there is 5 in total and the response from Dillon was that they'd snap into place which is not the case. There purpose is to prevent debris from going through the dent holes in the shellplate into or onto the platform part number 22060.
It looks like I'll be using glue
It looks like I'll be using glue
In the endless pursuit of perfection, we may achieve excellence.
Texas LTC and School Safety Instructor and NRA Training Counselor
Texas LTC and School Safety Instructor and NRA Training Counselor
-
SigM4
- Senior Member
- Posts: 861
- Joined: Tue Jun 12, 2007 11:14 am
- Location: Wichita, KS…for now (always a Texan)
Re: XL 650 Shellplate caps
All mine are.george wrote: Fri May 01, 2020 5:01 pm Not positive, but on the old shell plates, those plugs were molded in.
Success always occurs in private, and failure in full view.